Sharper Image EC-WS115 Instrukcja Obsługi Pobierz pdf (Strona 17)

BLADE INSPECTION, INSTALLATION, AND REMOVAL

DANGER!

Be sure to unplug the power cord from the outlet before attaching or removing the

saw blade from the tool. Accidental starting of the motor may cause bodily injury.

WARNING!

Besuretosecurelytightentheangeassemblyandallloosescrewsbeforetestingthe

unit. Please allow the saw blade to do the work. Applying excessive force may damage

the saw blade and cause premature failure of the bearings and gears. Such action may

decrease the rotation speed of the motor.

Onlyusesawbladeswith20mmarborsandmaximumspeedratingequaltoorhigherthan

the name plate of RPM of tool.

1. ToremovetheangeboltfromthespindleholdFlangeIIinpositionwiththe22mm

spannerwrench(133097),whileturningtheangeboltwiththeT-handlewrench

(133098) in a clockwise rotation until it is removed.

2. Withtheangeboltremoved,removeFlangeIIoffofFlangeI.

3. Install your 20mm arbor saw blade onto Flange I with the arrow on the blade pointing

in the same direction as the arrow on the cover (blade will turn in a clockwise rotation).

ThecuttingwheelshouldttightlyontheFlangeI.

4. ReinstallFlangeIIandthentheangebolt,turningcounter-clockwisetoinstall,once

angeboltishandtight,usethe22mmspannerwrenchtoholdFlangeIIinplaceand

nishtighteningtheangeboltwiththeT-handlewrench.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Brak uwag

Sharper Image EC-WS115 Instrukcja Obsługi Strona 17